[Elecraft] band decode/antenna switch controller

[Paul Gacek]

David 

Elecraft does and its the KCR2 kit.

See my blog for snaps etc

https://nomadic.blog/2019/01/07/suitcase-dxpedition-station-automation-step-1-the-elecraft-krc2/ <https://nomadic.blog/2019/01/07/suitcase-dxpedition-station-automation-step-1-the-elecraft-krc2/>

Also, I have been down a similar path recently and you might some of my station automation posts of value (or not…).

You will need something like this.

https://nomadic.blog/2019/04/07/suitcase-dxpedition-2x6-antenna-switch/ <https://nomadic.blog/2019/04/07/suitcase-dxpedition-2x6-antenna-switch/>

Paul
W6PNg/M0SNA

> On Jun 6, 2019, at 3:52 PM, David F. Reed <w5sv.dave at gmail.com> wrote:
> 
> In planning my next station, I have not found one item I would like to
> add...
> 
> I wish to automatically select the correct antenna per band when using a K3
> or K4 with associated amplifier.  The objective is to select the
> appropriate 1 of 8 possibilities remotely,  I am currently doing this
> satisfactorily with a microHam StationMaster, but it has a lot more
> capabilities that I am not using, and for my next station, a simpler band
> decode, select remote antenna capability would be what I am looking for.
> 
> I thought Elecraft used to offer such a best, but I can't seem to find it.
> Suggestion?
> 
> Thanks and 73 de W5SV, Dave
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w6png at yahoo.com