[Elecraft] Alpha Antenna/KX3.

Mark Petiford rv6amark at yahoo.com
Tue Jun 4 19:24:48 EDT 2019


 Gene,

I don't usually comment on products like antennas.  I cannot, however, resist this one:

I cannot comment on the current Alpha Antenna Mag Loop, because I don't have one.  My Alpha loop is 4 or 5 years old.  It was on sale and heavily discounted, so I purchased it without looking into its construction.  After I bought it I learned that is wasn't worth much of anything.  I won't tell you how much I paid for it; even on sale I am embarrassed.


Keep in mind that one of the contributors to inefficiencies in a mag loop is the resistance of the loop (which is the inductor) and parallel capacitor.  The first contributor of resistance was the overlapping anodized aluminum sections that were bolted together.  Each overlap had a few milliohms or more of resistance.  With 8 of these joints, the resistance added up, and a few milliohms is a lot in a tank circulation circuit.


The second bad feature was the capacitor.  Again, the resistance must be kept to a minimum.  The lossy part of a variable capacitor is the wipers that transfer current from the rotor (which moves) to a terminal that doesn't so you can pick the current up there.  The way to eliminate that resistance is to use a butterfly capacitor (which are had to find), or use a dual section capacitor.  Current goes in one stator, to the rotor, and out through the other stator.  You end up with 2 caps in series, and no wipers in the current path.

I never made a contact with the antenna except very local ones.  I have had much better success with the 26ft. wire and 16 ft. counterpose Walter (K6WRU) mentioned (exact dimensions are NOT important), and I would have almost $300 back in my pocket.  Oops!  I almost let the price slip.

That was the first antenna I had purchased in 40 years.  It left such a bad taste in my mouth that I went out to Palomar Engineers website and bought Kurt N. Sterba's book, "Kurt Speaks Out" and read it from cover to cover.  I feel better now.  The antenna sits in the back of my garage waiting to be broken down for parts.  It has a great tripod, and a nifty little RF indicator in the form of a neon bulb.  I will probably give the cap to some young ham to use in a transmitter project.


Do what Jim (K9YC) said!  Get educated first, then do your research on how the thing is made and works before you buy.  If Alpha has improved the antenna, I would love to hear about it.

I just checked their website, and it appears they have switched to coax for the loop.  Much better.  I cannot see what capacitor they use.

Sorry, Eric.  Way too long!


Mark
KE6BB

KX3, AX1, and some wire.


   
 On Tuesday, June 4, 2019, 8:19:50 AM PDT, Gene Moore via Elecraft <elecraft at mailman.qth.net> wrote:  
 
 I have just submitted my order for my KX3. As part of the next step, I am continuing my search for an antenna. At this point, I am leaning towards an Alpha Antenna mag loop. 
  


More information about the Elecraft mailing list