[Elecraft] Handedness

[Dave New, N8SBE]

Yes, but can you have a dynamic mic plugged into one and an electret mic
plugged in the other?

The K3/K3S has never supported this, and to this day, annoys the heck
out of me, since I have a Heil HC-4 headset (which is dynamic and
plugged in the rear connector) and an Elecraft hand mic (which is
Electret).

I have to go digging through the menus to turn the bias on/off every
time I want to switch mics.  On the plus side, mic HI/LOW gain is
separate for front/rear connectors, but NOT the bias setting.

Hopefully, this has been fixed for the K4.  Separate TX equalizer curves
should be also be supported, as well, along with mic gain, compression,
etc.

73,

-- Dave, N8SBE

-------- Original Message --------
Subject: Re: [Elecraft] Handedness
From: Wayne Burdick <n6kr at elecraft.com>
Date: Sun, June 02, 2019 11:47 am
To: Nr4c <nr4c at widomaker.com>
Cc: Elecraft Reflector <elecraft at mailman.qth.net>, w7aqk <w7aqk at cox.net>

Yes. You can have phones and mics plugged in both front/rear at the same
time.

Wayne


port this email list: http://www.qsl.net/donate.html