[Elecraft] K Pod Intermittently Errors

[hawley, charles j jr]

I have the latest firmware, and reloaded it. I also rewrote the macros to the K3s. No help. Maybe I'll send it to Watsonville.

Chuck Hawley
 c-hawley at illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles

________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Wes <wes_n7ws at triconet.org>
Sent: Saturday, July 27, 2019 1:37 PM
To: elecraft at mailman.qth.net <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] K Pod Intermittently Errors

Make sure you have the latest firmware in the K3.

I had lots of trouble early on with my K-Pod and it took me recording a video
clip and sending it to Elecraft before they believed me (sigh).  Revised FW
fixed it. That was some time ago and most likely you've upgraded, so this
probably is a non-issue but one never knows.

Wes  N7WS


On 7/27/2019 8:51 AM, hawley, charles j jr wrote:
> For some buttons, the Pod makes mistakes occasionally. Instead of sending the correct macro, it’ll send a different button programmed one...or send both the tap and hold ones. Mostly just happens with two of the buttons #4 and #5.
> My first pod messed up with #1 intermittently and Elecraft replaced it. But this one had a problem with #1 also intermittently.
> And wisdom on this? I love the Pod anyway.
>
> Chuck
> KE9UW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to c-hawley at illinois.edu