[Elecraft] Sudden K3 failure

[Mpridesti]

Confirmed that at an early stage of the trouble shooting.  No difference with either antenna selected (only one port has an antenna). 

Regards,

Mark, K1RX


> On Jul 26, 2019, at 7:28 PM, Dennis Moore <dennis at mail4life.net> wrote:
> 
> Any chance you accidentally switched antennas on 40m?
> 
> Dennis NJ6G
> 
>> On 7/26/2019 13:21, Mpridesti via Elecraft wrote:
>> Although I was able get the TX running again by merely doing a small twist to all the TMP connectors that were reachable with top cover removed and behind the front panel, unable to bring back the receiver front end on 40 m. I hear noise and very weak signals but nothing like the normal band noise and a hot receiver previously.
>> 
>> Now wondering if another part of the radio (tmp connectors) needs a small twist to break up oxidation. Not clear as to why just one band is affected. Any thoughts from this great resource?
>> 
>> Regards,
>> 
>> Mark, K1RX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mpridesti at yahoo.com