[Elecraft] [K2] Very Low SSB on 20 Meters

[Don Wilhelm]

Check everything in CW transmit first, including the VFO frequencies at 
the band edges.
Then check your SSB filter alignment (and CW too) with Spectrogram to 
make certain the filter passbands are aligned correctly.  The FL1 filter 
for both USB and LSB must be set to OP1.

Set things properly in receive and then check transmit.

73,
Don W3FPR

On 7/26/2019 12:39 PM, James Doty wrote:
> Oh, okay.
>
> I honestly don't know what to look for though.
>
>