[Elecraft] equalizer on k4

[Mike Markowski]

Since the K3 EQs are a little cumbersome to adjust, I wrote a small python
program a year or two ago:

  http://udel.edu/~mm/ham/elecraft/eq.html

The down side is that if you have another program querying the K3 while
running this, commands and replies intersperse.  I tend to run it to adjust
the EQs, then stop it before running my logging program.  I keep meaning to
write a linux K3 proxy to avoid the avoid the issue, but I find it much
easier to procrastinate. :-)  To other python programmers, please feel free
to enhance and share.

73,
Mike ab3ap

On Tue, Jul 23, 2019 at 12:23 PM Wayne Burdick <n6kr at elecraft.com> wrote:

> Yes. So is the EQ on our other transceivers.
>
> EQ on the K4 will be more easily adjustable, with a much better user
> interface, thanks to the large LCD.
>
> 73,
> Wayne
> N6KR
>
> ----
> elecraft.com
>
> > On Jul 23, 2019, at 8:35 AM, Richard Donner <richarddnnr2 at gmail.com>
> wrote:
> >
> > Does anyone know if the equalizer on the K4  is going to be  adjustable
> > real time so that you can listen to a station and adjust the equalizer as
> > you listen to the station.
> > Richard
>
>