[Elecraft] Dummy Load recommendation

[Bob McGraw K4TAX]

I agree that Bird dummy loads are some of the best.  Be sure to get one rated for at least your maximum power anticipated.  And do allow a margin of safety. I use 2x, thus for 100 watts I use a 250 watt rated load. 

I purchase all of my power measurement equipment from NM3E.COM.  

Bob, K4TAX


Sent from my iPhone

> On Jul 22, 2019, at 5:58 PM, hawley, charles j jr <c-hawley at illinois.edu> wrote:
> 
> Used Bird Attenuator is a good deal.
> 
> https://nm3e.com/AttenuatorSampler.htm
> 
> Then you’ll have a sample to plug into your counter or scope
> 
> Chuck Jack Hawley
> KE9UW
> 
> Sent from my iPhone, cjack
> 
> On Jul 22, 2019, at 4:59 PM, Art Nienhouse <ka9zap at gmail.com<mailto:ka9zap at gmail.com>> wrote:
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to c-hawley at illinois.edu<mailto:c-hawley at illinois.edu>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net