[Elecraft] K3/0 and CW

[John Huffman]

Mitch -

That has worked for other radios and my RemoteRig box, but the K3/0-Mini 
has a connector that is already plugged into the I/O jack.  I tried 
taking it out and using the connector I used with other radios, but that 
didn't work.  I wonder if I disconnect pin 4 from the Elecraft connector 
and instead connect my keyer output to pin 4 if that will do damage or 
disrupt the operation of the K3/0-Mini?

73,
John

On 7/22/2019 12:59 PM, Mitch Wolfson DJ0QN / K7DX wrote:
> John,
>
> You need to use the RRC's I/O port. See the RemoteRig manual pages 94,
> 95 and 242 (Appendix B) for details. This will not affect the K3/0 mini.
>
> 73,
> Mitch
>
> -- 
> Mitch Wolfson  K7DX / DJ0QN
> 10285 Boca Cir, Naples, FL 34109
> Skype: mitchwo
> USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
> Germany: Home:+49 89 32152700 - Mobile/WhatsApp:+49 172 8374436
>
> On 22.07.2019 06:04, John Huffman wrote:
>> I'm setting up a K3/0-Mini to control my K3 remotely.  I would like to
>> use an external keyer (Logikeyer) since I don't like the timing of the
>> RemoteRig keyer. I have questions.
>>
>> Does the KEY jack on the back of the K3/0-Mini do anything?  If it
>> operates like a straight key I could send my keyer output to that jack.
>>
>> I've seen suggestions to modify the cable to the I/O jack on the
>> RemoteRig box and insert the keyer output there.  Does this interfere
>> with the other I/O functions of the K3/0-Mini?
>>
>> 73 de K1ESE
>> John
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to dj0qn at arrl.net
>