[Elecraft] K3/0 and CW

[Fred Jensen]

John: If you are using the "Quadrapus cable set" that Elecraft sells for 
the K3/0-RRC1258 combo, I believe the answer is "Yes."  I remote to W7RN 
using my K3 and don't have a K3/0 but I've coached others who do get 
their configuration right and that's how they do it.  Pin 4 of the RJ45 
I/O connector on the back of the 1258 is the key line [pin 8 is ground] 
and you can use it instead, however the Elecraft cable set takes care of 
all the interconnections for you.

73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 7/22/2019 3:04 AM, John Huffman wrote:
> I'm setting up a K3/0-Mini to control my K3 remotely.  I would like to 
> use an external keyer (Logikeyer) since I don't like the timing of the 
> RemoteRig keyer. I have questions.
>
> Does the KEY jack on the back of the K3/0-Mini do anything?  If it 
> operates like a straight key I could send my keyer output to that jack.
>
> I've seen suggestions to modify the cable to the I/O jack on the 
> RemoteRig box and insert the keyer output there.  Does this interfere 
> with the other I/O functions of the K3/0-Mini?
>
> 73 de K1ESE
> John