[Elecraft] K3S AGC action in CW

[Roger]

Alright I understand............. J

 

By browsing the firmware archive I found a pretty old firmware version announcing an the implementation of an independent AGC system whenever “CW Decode“ is enabled. I enabled this function a while ago to see how good it is compared to human ears and brain and being lazy I let it enabled. So if you enable CW Decode the AGC will be locked to what is “slow” (with the default values). Disabling CW Decode the radio returns to the regular AGC system and works as in all other modes.

 

Hope this helps someone else now or in the future………………..

 

73, Roger, DL5RBW

 

From: Dave Sublette [mailto:k4to.dave at gmail.com] 
Sent: Friday, July 19, 2019 6:52 PM
To: Roger
Subject: Re: [Elecraft] K3S AGC action in CW

 

No,no. You can't get off that easy. You must tell why the problem occurred and how it was solved.  😀

 

Dave K4TO 

 

On Fri, Jul 19, 2019, 12:47 PM Roger <roger at mulzer.de> wrote:

Please ignore - problem solved!

73/Roger - DL5RBW




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k4to at arrl.net