[Elecraft] FT8 TX levels = no power

Peter Dougherty lists at w2irt.net
Tue Jul 16 18:46:18 EDT 2019


I should have mentioned, this is on a K3s. What radio settings are involved? Is it mic gain or something in the menu?

I did find the new Windows TX level for the K3s (purely by accident; I don’t think I could do it again on a bet), and I set it up to 100%. I also set the TX level in WSJT-X to 100%. I don’t know if there are any more level controls involved, and to be honest, I never like to run anything wide-open.

But with that said (and set), on FT8 transmit now I have four solid ALC bars, but I can’t push the 5th one to start flashing, as it had before.

What was even more aggravating was my RX levels went haywire and it took me almost an hour to find them. There’s GOT to be an easier way to control all these settings!

 

- pjd

 

From: turnbull <turnbull at net1.ie> 
Sent: Tuesday, July 16, 2019 5:48 PM
To: Peter Dougherty <lists at w2irt.net>
Subject: Re: [Elecraft] FT8 TX levels = no power

 

Ck radio settings.   After loading 2.1, I found rig setting changed from K3.   Once corrected all was ok.

 

 

 

Sent from my Samsung Galaxy smartphone.

 

-------- Original message --------

From: Peter Dougherty <lists at w2irt.net <mailto:lists at w2irt.net> > 

Date: 16/07/2019 22:41 (GMT+00:00) 

To: Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>  

Subject: [Elecraft] FT8 TX levels = no power 

 

Hi all,
I'm completely stumped at a problem I have no idea where to even start
looking at. Windows 10, version 1903 has completely buggered up the sound
mixer interface. No matter what I'm doing I can't get power out using
digital modes from the new WSJT-X version 2.1.0 (64 bit). 

CW and SSB are fine, so it's a computer problem, but evidently I'm not smart
enough to understand what's going on here. Has anybody run across this and
found a solution?




---------------------------------------------
73 and Good DX
Peter, W2IRT



President, North Jersey DX Association

DXCC Card Checker
Letter O Manager, ARRL Incoming 2nd District QSL bureau



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to turnbull at net1.ie <mailto:turnbull at net1.ie>  



More information about the Elecraft mailing list