[Elecraft] Am settings?

[Frank Krozel]

Hey Bob,
Long time.
I actually used the Jupiter you and I talked about awhile back to listen before going “live’.
I don’t have the wider filter yet, still looking for a 15kHz filter.  The guy I bought it from pulled the 6kHz, not a big deal as I am going to get the 15kHz someday.
The hole is still there to I can easily add it soon.
de Frank KG9H


> On Jul 12, 2019, at 8:32 PM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
> 
> First, how have you determined that you will need EQ for AM? With the stock SSB filter you won't get AM to sound good.  And with the 6 kHz AM filter, that depends largely on the type of mike being used and your mike technique.   I  use the same mike and mike technique and EQ for SSB as I do for AM.   Yes there are separate EQ settings stored for SSB and for AM.   I use the 6 kHz filter for AM and get excellent audio reports.
> 
> I find the better way to evaluate ones audio is to use a 2nd receiver and record the audio from that receiver while transmitting into a dummy load.   I use Audacity as a free recording application.    Then playback and listen.  Judge for yourself what sounds good.  Others may have poor hearing, bad room acoustics, and no telling how their receiver is adjusted.   Don't bother to use headphones and the monitor system as it will not be true due to bone conduction of sound through ones head.   {Radio guys use headphones to hear network cues and end of music or other program material, etc. and  not to listen to themselves.  Unless they have a giant ego. }
> 
> If you should ask on the air about your AM audio and EQ within an AM group, you'll receive as many comments as there are stations on the frequency plus 1.
> 
> 73
> 
> Bob, K4TAX
> 
> 
> 
> On 7/12/2019 6:07 PM, Frank Krozel wrote:
>> So let me start out by saying I am a CW guy but listen to the AM guys on the weekends.
>> Reminds me of when I just got into ham radio back in 1968. They guys were on 1805 here in Chicago area.
>> 
>> I have not yet bought the 13kHz filter so I am strapped with what I have in it now, stock.
>> 
>> Can anyone tell me how to set-up the transmit  TX EQ for AM?
>> 
>> As I understand it, the EQ set-ups are specific for SSB and AM, separately.
>> 
>> I have SSB set-up where I have presence but just cannot get AM to sound good.
>> 
>> de Frank KG9H
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kg9hfrank at gmail.com