[Elecraft] K-Pod Macro and P3

[Graziano Roccon (IW2NOY)]

Hello,

i send some of my actual macros used with via K-pod on my K3s&P3.
Maybe could be useful for somebody...



(Keep attention to the last command "#FNXn", this call the functiion on 
P3 button number "n", where i store my SPAN preferences)
[For example FNX1 is 5 khz, FNX3 is 10 Khz, FNX4 is 20 Khz etc.]

SSB UP5
SWH58;BW0320;SWT13;SWT13;FT1;SB1;UPB7;RT0;XT0;DE010;#FNX3

SSB UP10
MD2;SWH58;BW0320;SWT13;SWT13;FT1;SB1;UPB7;UPB7;RT0;XT0;DE010;#FNX4

CW UP1
SWH58;BW0040;SWT13;SWT13;FT1;SB1;UPB4;RT0;XT0;DE010;#FNX1

CLEANUP
FT0;RT0;XT0;LN0;SB0;SWT13;SWT13;

---------------------------------------------------------------------------------------------------------------------------------------

Some other useful macro command... for anyone

SET POWER
PC100; PC010;

SET MONITOR LEVEL
ML000; ML020;

SUBRECEIVER
SB1; ON
SB0; OFF

SPLIT
FT1; ON
FT2; OFF

RECALL MEMORY 32
MC032;

USING THE DIGOUT1 PIN11 on ACC
MN019;MP001;MN255;PC065;

SENDING WITH KEYER
KS020; Set keyer speed to 20 wpm
KYWIW2NOY; Send IW2NOY
KYW =; Send BT

----------------------------------------------------------------------

Last, but not least, my actual configuration for K-POD button/function
[If somebody is interested to know the macro behind the nutton, just 
write me on private]

(F2&F3 are useful when changing from SSB to Digital mode with WSJTX for 
example)
(F8&F16 are useful if you have a linear amplifier, like me)



           Tapping                        Holding

F1       IW2NOY (M1)         F9       	RR5NNTU (M2)
F2       MIC FP		     F10	USB
F3       MIC LINE	     F11	LSB
F4       SPOT		     F12	CW
F5       SSB 5UP	     F13	CLEANUP
F6       CW 1 UP	     F14	CLEANUP
F7       MONI 0		     F15	MONI 20
F8       Power 10W	     F16	Power 100W


Best regards, Graziano IW2NOY / W2NOY