[Elecraft] XVTR Out level

[Conrad PA5Y]

Hi Gary could you perhaps chose 2 transverters 144MHz and 145MHz and set the levels accordingly? Fortunately all my transverters have a 28MHz IF. Another Elecraft 'surprise'. The worst one for me is the K3S TX IMD on 6m, its really quite awful and not good enough for me to use. So I suppose that I will end up using the transverter port for 6m as well. Its a shame because the RX is outstanding.


You will love the performance of the Kuhne transverter with the K3, its the best combination that I have found for the band.


73


Conrad PA5Y


________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Gary Johnson <gwj at wb9jps.com>
Sent: 09 July 2019 06:10
To: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] XVTR Out level

Sure enough, the BPFs are in the low-level RF path on TX and RX. Moral of the story is to choose a transverter with a 28 MHz IF when maximum usable frequency range is desired.

Gary NA6O
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to g0ruz at g0ruz.com