[Elecraft] XVTR Out level

[Gary Johnson]

I'm testing the K3 XVTR output level for use with a Kuhne 144 
transverter (opt. 05) which uses a 14 MHz IF.

XV1 PWR is set to 1.5 mW as required. Checking with my spectrum 
analyzer, key-down CW output power at the XVTR Out jack varies as follows:

VFO=144 MHz (14.0 MHz out)  +1.3 dBm
145 (15.0)  -4.8
146 (16.0)  -17.5

Needless to say, the Kuhne output power varies proportionally. I also 
tested with XV1 IF set to 28 MHz and power output is flat. This 14 MHz 
level variation is unexpected; anyone seen this before?

Gary NA6O