[Elecraft] KPA500 Problem

[Bob McGraw K4TAX]

I did look at the parameters of my KPA500 this morning.  In STBY the HV 
is 75.4 and in OPER at 500 watts out, CW mode, key closed the HV is 63.7 
and current is 10.5 amps.   Amp is operated from a 240 volt source.

73

Bob, K4TAX


On 7/7/2019 6:20 AM, Mark Murray via Elecraft wrote:
> For Doug, K6JEY:
>
> In answer to your original question, as to whether you should look into
> the KPA500's low voltage values:     Yes.
>
> By far, the best advice and the best answers on this particular question
> will come from emailing Support at Elecraft.com .  By far.
>
> Once the voltage questions are addressed and things are back on track,
> please keep the rest of us in mind and send a follow-up summary to the
> list.  Looking forward to a speedy recovery : )
>
> // Mark  w2or
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>