[Elecraft] bizarre 30m ---> 20m K1

[Walter Underwood]

Maybe transmit into a dummy load and listen on a different receiver? You should get enough leakage to hear the K1.

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Jul 3, 2019, at 6:56 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:
> 
> On 7/3/2019 4:09 PM, Joseph Reed wrote:
>> f RBN shows you are on 20m you are on 20m.  You must have a 40/20 board.  Enter the menu, B2 and change it from 1o to 14.
>> 
>> RBN doesn’t lie often.
> 
> It can if someone feeding RBN feeds an in correct frequency.
> 
> A small frequency counter is good thing to have around. Hook a simple antenna to it and transmit a carrier. MFJ sells one for about $125.
> 
> 73, Jim K9YC
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org