[Elecraft] K1 4-band board wanted

[LL]

INCREDIBLE RESULT!!!

I called Elecraft, and a few hours later, they called back: they found ONE
two-band board, and they're kitting it up with 20 and 80 for me. I'll have
to swap the boards to change, but I'll have a four-band K1.

EXTREMELY satisfied customer, still.

On Mon, Jul 1, 2019, 9:35 AM Don Wilhelm <donwilh at embarqmail.com> wrote:

> Lloyd,
>
> Elecraft does still have some band kits for the 2 band board.  Order the
> kit for the band you wish to switch to.
> There are no new 2 band boards available from Elecraft.
>
> Yes, if you can find another 2 band board, you can change the band
> boards easily.  The K1 will remember the OPF offsets for up to 6 bands.
> You only need to change the board and set the "b1" and "b2" menu
> parameters to match the bands of the boards in use.
>
> 73,
> Don W3FPR
>
> On 7/1/2019 9:25 AM, LL wrote:
> > I'm acquiring a K1 with ATU, 30 and 40. Really would love to have 20 and
> 80.
> >
> > If nothing else, I might be interested in seeing if it's possible to
> rework
> > the existing board for 20, instead of 30.
> >
> > Is it possible to have four bands on two boards - that is, not on a
> > four-band board?
> > might it be possible to swap them out to switch bands, if needed, and
> only
> > two-band boards are available?
>