[Elecraft] Last Click Serial Port

[Nr4c]

Why not use the USB cable to computer?  My RJ45 goes to P3. 

And, yes, it must be seated firmly. 

Sent from my iPhone
...nr4c. bill


> On Jan 27, 2019, at 2:12 PM, KENT TRIMBLE <k9ztv at socket.net> wrote:
> 
> Another "gotcha" is forgetting to reset the RS232 baud rate.
> 
> This bites me after every FD because N1MM is different from my Palstar AT-AUTO.
> 
> 73,
> 
> Kent  K9ZTV
> 
> 
>> On 1/27/2019 9:00 AM, Mike Greenway wrote:
>> . . . so if you use the RJ45, even though the RJ45 appears to be in fully, if you have com port communication problems to your computer or cant talk to your P3, see if you hear that faint “last click” in the RJ45.  It is not just my particular K3S, I have seen the same situation on a second one.
> 
> 
> 
> ---
> This email has been checked for viruses by AVG.
> https://www.avg.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com