[Elecraft] KPA500 Assembly Help

[Bob McGraw K4TAX]

There is NOTHING like getting automatically an answer from the company 
and the person that designed the amp........on a Saturday morning!    
Thanks Jack.

73

Bob, K4TAX



On 1/26/2019 10:56 AM, Jack Brindle via Elecraft wrote:
> Ah, but you came to the right place to get an Elecraft answer!
>
> Use the two thick ones on the bottom plus one of the thin ones, then use a thin one on top. They are meant to reduce vibration, and thus hum when transmitting.
> Enjoy your KPA500, and if you have more questions, just ask!
>
> 73,
> Jack Brindle, W6FB
> Elecraft Engineering
>
>> On Jan 26, 2019, at 8:52 AM, Phillip Zminda <phil-z at comcast.net> wrote:
>>
>> I am nearly done building my KPA500 kit but not clear about one part of mounting the transformer. It came with 2 thin rubber disks and 2 thicker ones wrapped with the metal disk. The instructions call for 3 disks on the bottom and one on top. Do I put 2 thick and one thin on the bottom with a thick one on top? It isn’t clear to me from the manual. Since it’s Saturday I wouldn’t expect an answer if I called or emailed support Elecraft today.
>>
>> Thanks,
>>
>> Phil N3ZP
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jackbrindle at me.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net