[Elecraft] K3 Bricked HELP!!

[Nr4c]

First. Look manual about this and follow directions there. 

Then call customer support at Elecraft. 

Sent from my iPhone
...nr4c. bill


> On Jan 24, 2019, at 3:03 PM, Bob DeHaney <bobdehaney at gmx.net> wrote:
> 
> Trouble started with no reception on 14 or 24 mHz.  Reloaded configuration file which got reception back, but had a continuous ERR PTT.  Attempted a complete firmware reload.  K3 hung at MCU LD with all buttons inoperative.  I then tried the recovery procedure in the K3 Utility Help section.  The K3 comes on without backlight, and transmit blinking and MCU LD in the display.  The K3 Utility cannot open the port.  I’m stuck.  This K3 has all K3S upgrades including USB, etc. I have also tried rebooting the computer with and without USB connected.
> 
> 
> 
> Vy 73 de Bob DJ0RD/WU5T
> 
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com