[Elecraft] K3 S-meter reading and coax input or antenna voltage ?

[Wes]

At the antenna spigot.

On 1/23/2019 10:00 AM, Phil Hystad via Elecraft wrote:
> If I had an S-meter reading, S9 for example, on my K3, what could I infer about the voltage level of that signal at the Coax input to my K3?
>
> A table I found on the Internet for singals below 30 MHz says that an S-9 meter reading is a signal of 50-microvolts but where in the system is that registering 50 microvolts.  At the input the K3 or some other circuit within the K3?
>
> Thanks -- just mostly curious about this and the connection between S-meter reading and actual signals input to the receiver.
>
> 73, phil, K7PEH
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wes_n7ws at triconet.org
>