[Elecraft] K3 SWR Anomaly

[Eric Norris]

Have you done a TX GAIN CAL procedure?  I have found this often solves
quirky problems that have cropped up with my K3 over the past 10 years.

Also, if you are getting power overshoot, check to be sure your MIC or LINE
IN is not set higher than 4 bars with the 5th bar flashing on the ALC meter.

73 Eric WD6DBM

On Mon, Jan 21, 2019, 5:36 AM Ed G <ed.n3cw at gmail.com wrote:

> Hi Barry,
>      I think what I am seeing is related to your experience. I ran through
> some additional testing. I see perhaps some slight differences between ANT1
> and ANT2 positions as far as SWR readings, but nothing significant, at
> least on 40 meters...


>