[Elecraft] K3 DVR issue

[Nr4c]

Is it possible that you have VOX turned ON or bumped a PTT or FOOTSWITCH?  

I’ve had the KDVR in a K3 since 2009 and my K3S since they began shipping (S/N 10069, very early s/n). I’ve never had any issue like you describe. 

Have you contacted Elecraft customer support?  

Sent from my iPhone
...nr4c. bill


> On Jan 19, 2019, at 7:22 PM, Dauer, Edward <edauer at law.du.edu> wrote:
> 
> Today during the NAQP I experienced occasional strange behavior with a new KDVR in an updated K3 . . . wondering if this has happened to anyone else.  The recorder works just right 98% of the time.  Randomly, it hangs up in the middle of a recorded message.  It just stops.  No audio, no RF, but the K3 remains in transmit mode.  Sometimes tapping the same M button again restarts the message from the beginning and all is well. Sometimes, nothing has any effect - nothing will get the rig out of transmit other than a power down.  And then all is well again for a while.  This happens on more than one of the memory buttons, and it happens whether I tap the M button or the corresponding programmed button on the K-Pod.  It is infrequent, intermittent, and of course happens at the worst times.  On one and only one power-down I saw ERR-DVR.   Re-recording messages doesn't fix it.  The K3 has F/W revision 5.64, which may be one revision behind.  Anyone else experienced this or have an i
> dea what the problem is?  Tnx for any advice . . . 
> 
> Ted, KN1CBR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com