[Elecraft] K3s Line Out (stereo)

[Dave Sublette]

yes


On Tue, Jan 15, 2019 at 9:05 PM Charles Jack Hawley <cjackh9 at gmail.com>
wrote:

> Config-Spkrs set to 2?
>
> Chuck Jack
> KE9UW
>
> Sent from my iPhone, cjack
>
> > On Jan 15, 2019, at 7:01 PM, Dave Sublette <k4to.dave at gmail.com> wrote:
> >
> > My K3s arrived over the weekend and I have been setting it up. I am using
> > the rear Audio jacks to drive either headphones, or the Line out to drive
> > an amplifier and two speakers in the stereo mode.
> >
> > The headphone jack has stereo output ok.  But the line out only has right
> > channel audio.  Left channel has nothing but a low hum.
> >
> > I am testing them one at a time, using the same cable. So it is not a
> case
> > of a bad cable.  The plug inserts to the same depth in both the headphone
> > and line out jacks, so I believe the plug is properly inserted,
> >
> > I have been through both the Main Menu and Config menus, item by item.  I
> > see nothing that would give the option to turn off the left channel of
> the
> > line out.
> >
> > Anyone have any suggestions?
> >
> > Thanks,
> >
> > Dave, K4TO
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to c-hawley at illinois.edu
>