[Elecraft] K3 Sub-receiver RIT

[Don Wilhelm]

Gernot,

If you have the subRX, why not tune to listen for those off-frequency 
stations with the VFO B knob.  Your transmit frequency is unchanged on 
VFO A, so no need for RIT unless you are only listening to the mainRX.

An easy VFO A>B pushbutton will put VFO on the same frequency as VFO A 
anytime you change your transmit frequency.

73,
Don W3FPR

On 1/15/2019 4:29 PM, gt-i at gmx.net wrote:
> John,
> the issue with SO2V is that you want to stay on your run frequency, but 
> be able to slightly tune up and down to hear callers which are not 
> exactly on your TX freq. RIT comes in handy here, as you just press RIT 
> or CLR after the QSO is finished. I don't have a K-POD, but if it would 
> let me do this stuff I'd consider buying one.