[Elecraft] K3 Sub-receiver RIT

[K9MA]

On 1/14/2019 19:55, john at kk9a.com wrote:
>   Is the issue the way the P3 is used to move in on a signal?

Yes, that is exactly the issue. When unassisted, using the P3 is the 
best method I've found for finding new contacts. However, the span has 
to be 10 kHz, or it's too hard to resolve cw signals. (I know, I could 
add a VGA display.) Other than the RIT issue, running on VFO B and the 
sub rx works well.

If there were a setting, say, to make the RIT apply to VFO B only when 
the sub was on, the problem would be solved.

73,

Scott K9MA

-- 
Scott  K9MA

k9ma at sdellington.us