[Elecraft] K3 Sub-receiver RIT

[K9MA]

Thanks, Gernot. I came to the same conclusion. I also tried using 
"BSET", but it doesn't enable the RIT on VFO B. Maybe a firmware update 
could fix that?

73,
Scott K9MA


On 1/14/2019 19:01, gt-i at gmx.net wrote:
> Scott,
> I looked at the programmer ref manual and realized there is only one 
> RIT/XIT, which is controlling VFO A. I guess there are two choices left:
> - either you press A/B to switch to your CQ VFO.
> - or you try to mimick RIT of VFO B via FBxxx; commands with the help 
> of an external control knob.
> Maybe this feature can be added more easily to the K-POD?
> 73
> Gernot
> DF5RF
>
>
> Am 13.01.2019 um 18:14 schrieb K9MA:
>> I've found that during some contest operation, it's handy to call CQ 
>> on VFO B, while using VFO A to search and pounce. (Known as Single 
>> Operator 2 VFO mode, SO2V.) That way, when unassisted, I can use the 
>> P3 to locate promising signals. However, I sometimes wish the RIT 
>> would work with the sub-receiver on VFO B. Has anyone found a way to 
>> do this? Even better would be to have RIT on VFO B and XIT on VFO A.
>>
>> If it's not currently possible, I'd add it to my firmware wish list.
>>
>> 73,
>>
>> Scott K9MA
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9ma at sdellington.us


-- 
Scott  K9MA

k9ma at sdellington.us