[Elecraft] K3 Speaker Audio Quit - RESOLVED!

[James Bennett]

Got fixed!!! Reseated the plugs and all working fine now.

Thanks for everyone’s assistance!

Jim / W6JHB

> On Jan 13, 2019, at 6:11 PM, Brian Hunt <huntinhmb at coastside.net> wrote:
> 
> I take it that you are plugging the CM500 into the rear jacks. Make sure you have the headphones plug in the headphones jack and not the speakers jack. Yes, they are separate and right next to each other. Don't ask me how I know this. :-)
> 
> If you are using the internal speaker you want SPKRS set to 1. Stereo will appear in the headphones anyway. GL
> 
> Brian, K0DTJ
> 
>> On Jan 13, 2019, at 16:27, James Bennett via Elecraft <elecraft at mailman.qth.net <mailto:elecraft at mailman.qth.net>> wrote:
>> 
>> Well, this is a strange one. Last week my trusty old Yamaha CM500 cans finally got so deteriorated I got tired of picking small pieces of black rubber out of my ears so I looked for a replacement. Bought a Koss SB45 that I used for 15 minutes and quit because they hurt. Today I got a brand new CM500 delivered and hooked it up. 
>> 
>> What I got was nice audio in the headphones, but nothing to the speaker. I have SPEAKERS set to 2 for diversity RX. When I set SPKR + PH = yes I get audio to the headphones, but nothing to the internal speaker. When SPKR + PH is set to NO, I get nothing. Unplugging the CM500 cable makes no difference.
>> 
>> What the heck did I do to cause this? I hope it is something simple/stupid! Any ideas?
>> 
>> Jim / W6JHB
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to huntinhmb at coastside.net <mailto:huntinhmb at coastside.net>