[Elecraft] Battery Low K3
hawley, charles j jr
c-hawley at illinois.edu
Sun Jan 13 08:58:10 EST 2019
Good to know it gives a warning before it goes flat and leaks!
Chuck KE9UW
c-hawley at illinois.edu
Sent from my iPad
> On Jan 12, 2019, at 11:01 PM, Mpridesti via Elecraft <elecraft at mailman.qth.net> wrote:
>
> Don
>
> It is a K3. Bought it used and carries a low serial number. Never have changed the internal battery (over 8 years in my possession).
>
> Regards,
> Mark, K1RX
>
>
>> On Jan 12, 2019, at 11:41 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
>>
>> I assume you mean the KX3. The K3 has no internal battery.
>>
>> If you have Ni-MH batteries, they need recharging. If you are using Alkaline batteries, they need to be replaced. I assume you have set the menu BAT MIN for the type of battery you are using. See the KX3 manual page 36 of the manual.
>>
>> Set BAT MIN for the type batteries used. The default of 10 volts is good for external Lead Acid batteries. All other types require a different setting.
>>
>> 73,
>> Don W3FPR
>>
>>> On 1/12/2019 10:40 PM, Mpridesti via Elecraft wrote:
>>> Just saw a message pop up saying Battery Low
>>> Assume this is the internal battery requires replacement?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to c-hawley at illinois.edu
More information about the Elecraft
mailing list