[Elecraft] Query for new DSP features

[Bob McGraw K4TAX]

Use external audio processing, otherwise a compressor or limiter, with 
variable attack and release and threshold and ratio controls.   Then 
follow that with a small power amp to drive an external speaker.     
Frankly, I doubt you'd like the results.

I find it better to not use the NR feature due to the artifacts 
introduced into the signal  and I find it much more satisfactory to 
correctly adjust the Attenuation and RF Gain.

73

Bob, K4TAX


On 1/11/2019 10:49 PM, Walter Underwood wrote:
> It would be really great if the AF gain was automatically to keep the audio roughly level when NR is engaged. This drives me nuts, always riding the gain back and forth. I’m sure the gain adjustment would be different for different conditions, but at least get close.
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
>> On Jan 11, 2019, at 8:38 PM, Mike Lichtman via Elecraft <elecraft at mailman.qth.net> wrote:
>>
>> Wayne,
>>     I would like to see an improved Noise Reduction that doesn’t lower the volume or distort as much. Also the digital mode decode has never really worked well for me and, yes,
>> I read the manual about using it. Could you have the digital choices RTTY, PSK31, etc. instead of the current settings like FSK, data, etc?
>> Pie in the sky thought — Having the radio identify the type of digital signal being received with a word in the display and automatically change modes/settings to accommodate it.  73 Mike KF6KXG
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wunder at wunderwood.org
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net