[Elecraft] ERR TXF

Nr4c nr4c at widomaker.com
Thu Jan 10 18:00:45 EST 2019


For goodness sakes, give up on the CONFIG menu in the radio and use the utility. It’s so much easier and you can see all the filters at once. 

Sent from my iPhone
...nr4c. bill


> On Jan 10, 2019, at 5:35 PM, Mpridesti via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> Thanks Vic 
> 
> Guess I need to spend some quality time in the filter configuration portion of the manual.  Did manage to get the BW set so I use CW again but need to really setup the filters by BW.  
> 
> Thanks all!
> 
> Regards,
> Mark, K1RX 
> 
> 
>> On Jan 10, 2019, at 3:50 PM, Vic Rosenthal <k2vco.vic at gmail.com> wrote:
>> 
>> Select AM mode and then go to CONFIG:FLTX.
>> Or (better) use the he configuration tab of the K3 utility, as Don suggested.
>> 
>> Victor 4X6GP 
>> 
>>> On 10 Jan 2019, at 21:04, Mpridesti <mpridesti at yahoo.com> wrote:
>>> 
>>> Ok understand except how do you select AM and have it stay?
>>> 
>>> Went to the CONFIG menu and selected FLTX (it shows CW in al FL numbers)  Tried to select a different mode I.e. AM but it does not stay AM
>>> 
>>> Regards,
>>> Mark, K1RX 
>>> 
>>> 
>>>> On Jan 10, 2019, at 1:49 PM, Victor Rosenthal 4X6GP <k2vco.vic at gmail.com> wrote:
>>>> 
>>>> This error is caused by selecting a filter other than the 2.8 or 2.7 kHz filter as the transmit filter. Use CONFIG:FLTX to select that filter for CW/DATA/SSB. (Except if you have FM (13 kHz) or AM filters (6 kHz) you must select those filters in the FM and AM modes).
>>>> 
>>>> 73,
>>>> Victor, 4X6GP
>>>> Rehovot, Israel
>>>> Formerly K2VCO
>>>> CWops no. 5
>>>> http://www.qsl.net/k2vco/
>>>>> On 10 Jan 2019 20:08, Mpridesti via Elecraft wrote:
>>>>> Strange issue
>>>>> I setup the K3 for diversity RX
>>>>> Now I can not transmit CW. I get an ERR TXF
>>>>> indication. What needs to be changed to correct?
>>>>> Regards,
>>>>> Mark Pride
>>>>> 603-231-8965
>>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com



More information about the Elecraft mailing list