[Elecraft] ERR TXF

[Don Wilhelm]

I forgot to say that most modes will use the 2.7/2.8 kHz for transmit. 
The exceptions are AM and FM.

73,
Don W3FPR

On 1/10/2019 5:35 PM, Mpridesti via Elecraft wrote:
> Thanks Vic
> 
> Guess I need to spend some quality time in the filter configuration portion of the manual.  Did manage to get the BW set so I use CW again but need to really setup the filters by BW.
> 
> Thanks all!
> 
> Regards,
> Mark, K1RX
> 
> 
>> On Jan 10, 2019, at 3:50 PM, Vic Rosenthal <k2vco.vic at gmail.com> wrote:
>>
>> Select AM mode and then go to CONFIG:FLTX.
>> Or (better) use the he configuration tab of the K3 utility, as Don suggested.
>>
>> Victor 4X6GP
>>
>>> On 10 Jan 2019, at 21:04, Mpridesti <mpridesti at yahoo.com> wrote:
>>>
>>> Ok understand except how do you select AM and have it stay?
>>>
>>> Went to the CONFIG menu and selected FLTX (it shows CW in al FL numbers)  Tried to select a different mode I.e. AM but it does not stay AM
>>>
>>> Regards,
>>> Mark, K1RX
>>>
>>>
>>>> On Jan 10, 2019, at 1:49 PM, Victor Rosenthal 4X6GP <k2vco.vic at gmail.com> wrote:
>>>>
>>>> This error is caused by selecting a filter other than the 2.8 or 2.7 kHz filter as the transmit filter. Use CONFIG:FLTX to select that filter for CW/DATA/SSB. (Except if you have FM (13 kHz) or AM filters (6 kHz) you must select those filters in the FM and AM modes).
>>>>
>>>> 73,
>>>> Victor, 4X6GP
>>>> Rehovot, Israel
>>>> Formerly K2VCO
>>>> CWops no. 5
>>>> http://www.qsl.net/k2vco/
>>>>> On 10 Jan 2019 20:08, Mpridesti via Elecraft wrote:
>>>>> Strange issue
>>>>> I setup the K3 for diversity RX
>>>>> Now I can not transmit CW. I get an ERR TXF
>>>>> indication. What needs to be changed to correct?
>>>>> Regards,
>>>>> Mark Pride
>>>>> 603-231-8965
>>>
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>