[Elecraft] KX3 RX I/Q testing

[Walter Underwood]

The levels from the RX I/Q are very low, so you might not hear anything.

Pages 26 and 27 in the manual talk about using that for computer-based SDR applications.

Also, check the RX I/Q menu setting. If that is OFF, you won’t get any output from that jack.

Finally, fldigi does not use I/Q signals for its waterfall. It uses the regular audio output from the PHONES jack.

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Jan 5, 2019, at 8:42 PM, Kevin F. <royord at gmail.com> wrote:
> 
> Thanks for the prompt reply, I guess the question that I would like to answer
> is, if I were to plug in to both sides of the RX I/Q port should I hear
> anything at all? If I shouldn't then great, if I should then I'm going to
> need to figure out what's going on with my radio such that I can't heard
> anything at all...
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org