[Elecraft] How to Isolate 2nd Transceiver in two Radio Base Station (WU6R / Mark)

[Mark Wheeler]

Dick,

Thanks.
Mark

On Jan 01, 2019, at 07:46 AM, Dick Dievendorff <dick at elecraft.com> wrote:

I just googled “bandpass filter so2r” and found a number of useful discussions and product references on this topic.

73 de Dick, K6KR



On Jan 1, 2019, at 04:34, Mark Wheeler via Elecraft <elecraft at mailman.qth.net> wrote:


I see lots shack photos with two transceiver setups, especially two Elecraft K3S radios; how do you isolate the 2nd transceiver or SDR receiver (SDR Play, for example) so that you do not damage one transceiver while transmitting with the other? I am assuming there is a way to use both radios at the same time.

Can I safely use an antenna switch to switch between multiple transceivers using one antenna, or will I risk damaging the non-transmitting radio on the other side of the antenna switch?

If there is a way to do this can anyone explain their setup?

Thanks.

Mark
WU6R
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to dick at elecraft.com