[Elecraft] How to Isolate 2nd Transceiver in two Radio Base Station (WU6R / Mark)

[Dick Dievendorff]

I just googled “bandpass filter so2r” and found a number of useful discussions and product references on this topic.

73 de Dick, K6KR



> On Jan 1, 2019, at 04:34, Mark Wheeler via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> 
> I see lots shack photos with two transceiver setups, especially two Elecraft K3S radios; how do you isolate the 2nd transceiver or SDR receiver (SDR Play, for example) so that you do not damage one transceiver while transmitting with the other?  I am assuming there is a way to use both radios at the same time.
> 
> Can I safely use an antenna switch to switch between multiple transceivers using one antenna, or will I risk damaging the non-transmitting radio on the other side of the antenna switch?
> 
> If there is a way to do this can anyone explain their setup?
> 
> Thanks.
> 
> Mark
> WU6R
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com