[Elecraft] K1, U1 Socket

[Tom Johnson]

Thank you!

On Tue, Feb 26, 2019, 12:53 PM Don Wilhelm <donwilh at embarqmail.com> wrote:

> Tom,
>
> An 18 pin DIP socket is a generic item.  Use it.
>
> 73,
> Don W3FPR
>
> On 2/26/2019 3:02 PM, Tom Johnson wrote:
> > I am building a Four Band Module K1.  I got my parts a little mixed up
> and
> > installed the 18 Pin U1 socket from the 2 Band Module.  The socket that
> came
> > with the 4 Band Module has "18" embossed below the top notch.  The socket
> > from the 2 Band Module likewise has "18" embossed below the notch, but
> also
> > has "A" embossed on the un-notched section.  I'm assuming (hoping) this
> is
> > simply a generic socket and the parts are the same: correct?
> >
>