[Elecraft] OT: Astron linear PS regulation issues

[Bob McGraw K4TAX]

I have personally found several instances in power supplies I either own 
or have repaired where the green power wire lug is firmly attached by 
the bolt and nut.   It however was nicely insulated by the paint!.     
Visual inspection is the best way to determine if an issue exists.  Do 
take time to remove the bolt and nut securing  the wire lug to the 
chassis.   Clean the area to bright shining metal where the lug would 
come in contact with the chassis.  Then reattach the green wire and lug 
with the original nut and bolt.

73

Bob, K4TAX


On 2/25/2019 4:26 PM, Rose wrote:
> While you have the cover off, check for paint under the
> lug on the green power cord wire …
>
> 73!
>
> Len Kopp- K0PP