[Elecraft] K-3 Power Output

[Bob McGraw K4TAX]

Check the Power Set Per Band setting in the K3 config menu. Should not 
be set to NORmal.


73

Bob, K4TAX

On 2/24/2019 2:07 PM, Jim McCook wrote:
> One of the features I liked with the K-3/KPA-1500 combo was having 
> power setting in the K-3 remain at 100w for barefoot or amplifier STBY 
> position.  When the KPA-1500 was set to OPER, the power from the K-3 
> reverted to the low drive level, such as 32w.  Now it remains at one 
> power setting either way.  I can't figure out what caused that 
> change.  The cable between both units is secure in place and they are 
> communicating with each other.  As I tune the K-3 the KPA-1500 tuner 
> settings change normally.  Any idea why this changed?  -Jim
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html