[Elecraft] K3 and DATA Mode Transmit Question

[Barry]

Ed,
     Your basic set up is correct, DATA mode - AFSK. Do use line in/out. 
However, there is no need to to switch into USB. FLDIGI will take care 
of everything from here. I use VOX to turn on the transmitter vice 
computer control and this just works FB. And yes, K3NDM will be in NAQP 
this weekend.

73,
Barry
K3NDM

------ Original Message ------
From: "Ed G" <ed.n3cw at gmail.com>
To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Sent: 2/23/2019 8:36:30 AM
Subject: [Elecraft] K3 and DATA Mode Transmit Question

>My K3 seems to be all set up for RTTY – DATA Mode, AFSK A selected, I am using Line in on the rear panel (selected in the MENU), I use MMTTY/N1MM, and I use a microKeyer III.  All appears well except that I need to switch the K3 into USB mode to actually transmit RTTY.  If I have the K3 set to DATA mode, the PTT is working (K3 TX light comes on) but the K3 is not transmitting tones.
>
>This must be something simple I am overlooking. Any ideas for what to check?
>
>--Ed—
>
>
>Sent from Mail for Windows 10
>
>
>
>
>---
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html