[Elecraft] Second RX problems

[Bjorn SM0MDG]

Yes I did check the antenna settings for SUB RX. It seems to be a problem that appeared with an upgrade or by time. I can’t remember I did anything in settings to create this behaviour. As I am able to get it working again by going into filter settings and press SUB and then the RX dies when I do something with the radio (either directly or via CAT) it seems to be software related rather than hardware.

I’ll pass this on to support, but if someone has more ideas I am all ears as I really need my second RX in the contest this weekend.

73 de Björn,
SM0MDG
SE0X


> On 23 Feb 2019, at 02:22, Hostgate <jasimmons at pinewooddata.com> wrote:
> 
> Bjorn,
> 
> Did you check ant1/2 and RX ANT for SSB?
> 
>> On Feb 22, 2019, at 5:19 PM, Bjorn SM0MDG <bjorn at sm0mdg.com> wrote:
>> 
>> Hi,
>> 
>> I am setting up for the CQ160 SSB contest and notice a strange behaviour with my K3. Opening the second RX there are no received signals. Second RX/Diversity works well in CW, but not in SSB. If I go into settings and filter settings, then press SUB the receiver starts. It continues working until I touch the filter adjustments or any of the other rotary encoders SHIFT, WIDTH, SPEED/MIC or CMP/PWR. 
>> 
>> I can remember I changed any settings relating to filters and second RX in a long time.
>> 
>> Any ideas out there?
>> 
>> 73 de Björn,
>> SM0MDG
>> SE0X
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>