[Elecraft] KPA-1500 tuner question

[Dave]

My KPA1500 tuner responds to CAT commands from my Flex radio and doesn’t miss a beat. 

So CAT seems to be fine but AUX connection is “intermittent”?

Dave wo2x

Sent from my waxed string and tin cans. 

> On Feb 21, 2019, at 12:33 PM, Peter Dougherty <lists at w2irt.net> wrote:
> 
> This is exactly what happened to me. Very annoying. My KPA is in the shop repairing the blown final and I hope they can address this issue as well. My thinking is that if a tuned solution for a given frequency is already known then it should be set as soon as the radio QSYs there.
> 
> - pjd
> 
> -----Original Message-----
> From: Walter J. Legowski <sue.walt at dososaur.com> 
> Sent: Thursday, February 21, 2019 10:22 AM
> To: Peter Dougherty <lists at w2irt.net>; Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KPA-1500 tuner question
> 
> I experienced the same thing, especially on 20M.  The tuner is apparently ignoring some of the signals on the AUXBUS line.  I put a scope on that line.  I can see, some of the time, the amplifier responding to the signal with a "clunk" as the tuner relays adjust to the new segment.  The rest of the time, I see the signal, but no response from the amp.  If you attempt to transmit when the signal is ignored, you get chattering relays followed by "ATU Retune Complete" on the amp display.  I took a photo of the signal trace and sent it to Support yesterday.  They haven't gotten back to me yet.
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html