[Elecraft] Looking for a way to switch an antenna input to the KAT500

[Tom]

Hi,

Yes this looks interesting as does the ones from Dewey. It seems that top
ten devices also has a 6 antenna to 1 radio switch.  Anyone know if it can
operate the other way around? 6 radios to one antenna (kat500)?

73 Tom

 

From: John Simmons <jasimmons at pinewooddata.com> 
Sent: February 17, 2019 5:10 PM
To: Jack Brindle <jackbrindle at me.com>
Cc: Tom <elecraft.list at videotron.ca>; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Looking for a way to switch an antenna input to the
KAT500

 

Jack,

Thanks for bringing this to my attention... it is just what I have been
looking for to switch between my main and remote operated stations!

73,
-John NI0K




Jack Brindle via Elecraft <mailto:elecraft at mailman.qth.net> 

Sunday, February 17, 2019 3:59 PM

TopTen has a nice A/B switch with pretty good isolation characteristics.
See: https://toptendevices.com/products/ab-station-selector/
<https://toptendevices.com/products/ab-station-selector/>
<https://toptendevices.com/products/ab-station-selector/>
It requires a 12V signal for switching, I believe.

Array Solutions also sells some devices that may be of interest.

73!
Jack, W6fB


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jasimmons at pinewooddata.com
<mailto:jasimmons at pinewooddata.com> 

Tom <mailto:elecraft.list at videotron.ca> 

Sunday, February 17, 2019 2:30 PM

Hi,
I use a Kat500 with my K3 and KX3. However, I have a number of other radios
which I would like to use with the Kat500. So I'm looking for a antenna
switch that can change inputs in some way based on an electronic signal. The
signal can be via serial device, or network doesn't matter. Anyone know of
such a programmable switch? 
Thanks, Tom
Va2fsq.com

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
<mailto:elecraft-bounces at mailman.qth.net>
<mailto:elecraft-bounces at mailman.qth.net> <elecraft-bounces at mailman.qth.net>
On Behalf Of Bob McGraw K4TAX
Sent: February 17, 2019 3:06 PM
To: elecraft at mailman.qth.net <mailto:elecraft at mailman.qth.net> 
Subject: Re: [Elecraft] Coax Switches

Smart man and decisions and the way to do things correctly. Glad to see
this.

73

Bob, K4TAX


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to elecraft.list at videotron.ca <mailto:elecraft.list at videotron.ca> 


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jasimmons at pinewooddata.com
<mailto:jasimmons at pinewooddata.com>