[Elecraft] New KPA500/KAT500 question

[Don Wilhelm]

Dave,

Open the KAT500 manual to page 5 and see the cabling diagram depicted there.

There is no relationship between the K3 and P3 for considerations with 
the amplifier and ATU.

If you have a K3S - the P3 connects to the P3 with the RS232 connector 
and not the ACC connector, so there is no conflict.

If you have the K3S or a K3 upgraded with the KIO3B, then download the 
latest P3 manual and look at the cabling on page 5.  You will need the 
CBLP3Y to connect it as shown there.

73,
Don W3FPR


On 2/16/2019 7:51 PM, Dave Cole (NK7Z) wrote:
> Hello,
> 
> I have a K3, and a P3, connected to a computer.  I now have a KAT500, 
> and a KPA500.
> 
> I do not see a full cabling diagram for the entire setup.  Does one 
> exist?  If so, where can I obtain it?
>