[Elecraft] KX3 and SDR IQ ( Spectravue) question

[Don Wilhelm]

Viggo,

How do you propose to connect the SDR IQ to the KX3?
The KX3 does not have an IF output - in fact the KX3 IF is either at 
baseband or 8kHz if you turn on the 8kHz shift in the menu.

The KX3 DOES have the RX I/Q output which you can connect to a computer 
soundcard or the KX3 for a panadapter display.

Yes, the SDR IQ works fine with the K3 which has an IF output at 8.215MHz.

73,
Don W3FPR

On 2/16/2019 12:03 PM, Viggo Magnus Nilsen Nilsen wrote:
> Hello Elecrafters.,
> 
> Have some of you connected an SDR IQ to the KX3,, ( use as an Panadapter
> with Spectravue) ?
> 
> Work very well with the K3........
> 
> 73' Viggo  LA9NEA.,
> 
> KX3,K3 and KPA500 owner.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>