[Elecraft] KPA1500 Remote - How to get it to work on a WAN ?

[Rick Tavan]

Run one instance of KPA1500 Remote on a computer that's always running at
the radio site. Tell it the COM port for the KPA1500 and Start Hosting
Remote. Specify the Server Setup parameters; the critical one is TCP Port
which must also be set up in your Internet router for *port forwarding*.
Each router model and firmware release may have a different way of setting
this up; sorry.

At the control site, run another instance of KPA1500 Remote, typically on
your logging computer, and tell it to Connect. Specify matching parameters
including that Internet port number. Port forwarding isn't required on the
control side. If you have it all specified correctly, the control site
instance will connect to the radio site instance and work beautifully. At
least, it does for me. Great program!

73,

/Rick N6XI
--

Rick Tavan
Truckee, CA


On Mon, Feb 11, 2019 at 7:19 PM Rich Yost via Elecraft <
elecraft at mailman.qth.net> wrote:

> I also cannot get the KPA1500 Remote to function over the internet (WAN)
> I even put it into a DMZ with no luck.
>
> works great on my LAN
>
> Does anyone have any directions on how this is to be setup ?
>
> Can't someone make a mobile app that works ?
>
> Rich
> n2ry
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rtavan at gmail.com
>