[Elecraft] P3 Panadadopter

[Bob McGraw K4TAX]

As a rule I set the REF LVL such that the no signal band noise is about 
the bottom of the display.   Then I set the SCALE to display the 
strongest signals on the band at the top of the display. These will 
change from band to band and antenna to antenna.

Otherwise, with a dummy load on the receiver and the BW at 2.7 kHz, set 
the REF LVL to about 120 and the SCALE to 80.     Set the AVERAGE value 
to about 15.  These seem to give adequate display. Of course one can 
refine the values for more or less displayed details of the signals, 
depending on BW of the receiver.

73

Bob, K4TAX


> On 12/28/19 13:13, kd2fsh wrote:
>> If somebody can help me what are the best settings for Re Level and 
>> Scale? I just move to Arizona from New Jersey and put up an EndFed 
>> Antenna.Thank youJerryKD2FSH201-937-530673Sent from my Verizon, 
>> Samsung Galaxy smartphone
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net