[Elecraft] K3/0 Mini

[kb2mjeff at att.net]

Hi Mike. I sold my K0 setup a few months ago. It worked perfectly for years, but wanted to bring my K3 with me for the winter so I replaced it with a remote IC-7300. While up there for the summer I used to switch to remote mode when I went to the shore for the weekend, if I remember right there were three connections to  change. The PTT from foot switch to the remoterig box, the audio from local speaker to remoterig box, and the serial connection to local PC to the remoterig box. This took about a minute to switch over. I f I wanted to use the AMP and tuner I had to leave a local PC on running TeamViewer. 

73 Jeff kb2m 

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Michael C. Marx
Sent: Tuesday, December 24, 2019 1:22 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3/0 Mini

Hi all

So I have a K3/0 Mini with the remoterig setup. My station is a K3, P3, KAT500 and KPA500.  I want to be able to keep it all hooked up while installing the remoterig system.  Is it possible to do this?  It looks like I need to disconnect the ACC CABLE going to the KPA500 along with the RS232 line so the remoterig can be used.  That pretty much disables the rest of the station. Am I missing something?   I sure don’t want to disconnect half of my station everytime I want to use remote.  I’d sure like any pointers on hooking this all up without disabling my station every time I want togo remote.  Any help is sure appreciated

73 Mike WB0SND 


Michael Marx
www.vacuumtubes.com
636-939-9190
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to kb2m at arrl.net