[Elecraft] [K2] N1MM Logger sending CW to K2

[Robert G Strickland]

Mike...

I have this connection working. However, I use a microHAM CW interface 
between the radio and computer with its router software [sets up virtual 
ports and WinKey functionality] . This setup works cleanly and reliably. 
I'm no expert in this area, but my reading here on the list prompts me 
to say that a direct computer-to-radio setup for the K2 may not be 
possible. I'm sure others with expertise will help you out.

...robert

On 12/14/2019 19:33, NJMike wrote:
> I am trying to setup my K2 with N1MM Logger so that I can send CW and phone
> from my Windows 10 tablet to the K2.  I have the KIO2 cable built and just
> purchased the KUSB converter.
>
> I updated the driver for the converter (although I find no instructions that
> say this needs to be done).
>
> N1MM Logger now follows the radio band and correctly logs the contact.
> However, I cannot send CW from N1MM Logger to the K2.  I get the following
> error message at the bottom of the Entry window:  "Unable to send this CW
> because there is no CW port set in Config: "
>
> The user manual for N1MM Logger makes this comment:  "N1MM Logger does not
> support the K2 “virtual keying” feature using commands sent to the K2 serial
> port."
>
> So I am confused as to whether or not it is even possible to set this up.
> Has anyone been able to do this?  Any help is appreciated, and thanks!
>
> Mike
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rcrgs at verizon.net
>

-- 
Robert G Strickland, PhD ABPH - KE2WY
rcrgs at verizon.net.usa
Syracuse, New York, USA